Single Layer Paper Making Press Felt
Introduction:
Single Layer BOM Felt is made up of single base layer fabric and fiber layer. Base layer is woven from synthetic filament or multi-filament. The structure is designed base on different paper machine, different press position and different type of paper. Fiber layer is consisted of different lap of fiber web and different diameter of fiber for the best trainability and fiber support index.
It has good quality properties such as less elongation, easy to wash, no-mark on paper, long life performance etc. and can be used in all different kinds of paper making machine to produce all different kinds of paper.
Specification:
| Single Layer BOM Felt |
↗ |
Single layer Forming BOM Felt |
| - |
Single layer Press BOM Felt |
| - |
Single Layer Top BOM Felt |
| ↘ |
1.5 layer BOM Pulp (Paper ) Felt |
| Paper Machine Felt |
Application : |
| Paper Machine : |
Cylinder ,Super Forming ,Fourdrinier,Inclined Wire Machine ,Nip wire Machine etc for forming section felt ,press felt. |
| Machine Velocity: |
≤800m/min |
| Paper: |
≥8g/m³ kinds of paper |
| NIP: |
≤80kn/m |
| Sigle Layer BOM Technical Parameter: |
| Felt GSM: |
700-1200g/m² |
| Felt GSM Tolerance: |
≤±4% |
| Air Permeability: |
30-120cfm |
| Tensile Strength: |
≥2000N/5m |
| Elongation Percentage: |
≤1% |
| Width Variation: |
≤±2cm |
Advantage:
- High porosity structure.
- Very good dewatering and stability.
- Easy to keep clean and washing.
- Fast start up and run in.
- Long life time.
- Good wear resistance.
- Good void volume to operation.
Welcome your inquire and trial order. If you need info about other products, please feel free to contact with me.
Audited Supplier 
){kind=link}