Single Layer BOM Felt / Paper Making Felt
Introduction:
Single Layer paper machine felt is made up of single base layer fabric and fiber layer. Base layer is woven from synthetic filament or multi-filament. The structure is designed base on different paper machine, different press position and different type of paper.
It has good quality properties such as less elongation, easy to wash, no-mark on paper, long life performance etc. and can be used in all different kinds of paper making machine to produce all different kinds of paper.
Specification:
| Single Layer BOM Felt |
↗ |
Single layer Forming BOM Felt |
| - |
Single layer Press BOM Felt |
| - |
Single Layer Top BOM Felt |
| ↘ |
1.5 layer BOM Pulp (Paper ) Felt |
| Paper Machine Felt |
Application : |
| Paper Machine : |
Cylinder ,Super Forming ,Fourdrinier,Inclined Wire Machine ,Nip wire Machine etc for forming section felt ,press felt. |
| Machine Velocity: |
≤800m/min |
| Paper: |
≥8g/m³ kinds of paper |
| NIP: |
≤80kn/m |
| Sigle Layer BOM Technical Parameter: |
| Felt GSM: |
700-1200g/m² |
| Felt GSM Tolerance: |
≤±4% |
| Air Permeability: |
30-120cfm |
| Tensile Strength: |
≥2000N/5m |
| Elongation Percentage: |
≤1% |
| Width Variation: |
≤±2cm |
Advantage:
- High porosity structure.
- Very good dewatering and stability.
- Easy to keep clean and washing.
- Fast start up and run in.
- Long life time.
- Good wear resistance.
- Good void volume to operation.
Welcome your inquire and trial order. If you need info about other products, please feel free to contact with me.
Audited Supplier 
){kind=link}