| Customization: | Available |
|---|---|
| Condition: | New |
| Temperature: | 150-180 Degree |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction:
A woven high-speed corrugator belt was developed to transfer the board and the rapid drying of the board. The structure and the quality fabric of the belt facilitate steam evaporation from the board. The belt is the 3-layer belt. The structure of the two surface layers is not the same as the middle layer. This structure is developed to produce flat boards on high-speed corrugating machines. The surface of the belt is twill, this reduces the noise while the belt running on the machines. The material of the two surfaces layer is not the same as the middle, this can increase the friction coefficient
Our Enhanced High-speed Corrugator Belt with low noise, suitable for average linear speed 300/min;
| Brand | ANKE |
| Material: | Polyester synthetic fiber |
| Weight Per unit: | 7.5 ± 0.3 kg/ m2 |
| Thickness: | 9 ± 0.3 mm |
| Width: | 1600 ~ 3600mm |
| Length: | Customized |
| Heat Resistant: | 240 °C |
| Tensile Strength: | 75 Mpa |
| Coefficient of Friction | ≥0.40μ |
|
Air-permeability (40mm Water Column) |
2.2 m³/m2 min |
| Working meters(myriametre) | 6500 |
Main applications:
The Solid Woven Polyester Belt is one main special part of the corrugated machine automatic production line. Its main function is to ensure that the board transportation and the rapid evaporation of the water inboard.
Product Features:
1. Straight cut edge and long service life.
2. Level surface, clean mark.
3. Hot-press and flocking joint.
4. High moisture absorption and release; Low noise and high speed of operation.
5. Good abrasion resistance.
6. Firm stainless steel fastener.
){kind=link}